MLLighting Updates

User avatar
mcascio
Founder
Founder
Posts: 8270
Joined: Tue Jan 28, 2003 4:03 pm
Location: Kenosha, Wi
Contact:

Postby mcascio » Tue Aug 14, 2007 2:47 pm

More updates posted today.
Mario Cascio
Cinemar, Inc.
http://www.cinemaronline.com

User avatar
mcascio
Founder
Founder
Posts: 8270
Joined: Tue Jan 28, 2003 4:03 pm
Location: Kenosha, Wi
Contact:

Postby mcascio » Tue Aug 14, 2007 3:05 pm

One more update to PLC posted.
Mario Cascio

Cinemar, Inc.

http://www.cinemaronline.com

bigDvette
Expert
Expert
Posts: 718
Joined: Thu Oct 12, 2006 12:19 pm
Contact:

Postby bigDvette » Tue Aug 14, 2007 8:23 pm

Was this supposed to fix anything relative to my postings? If so it is still doing exactly the same thing.

OFF seems to almost always work and on posts all kind of combinations of blanks, on, 0 or 100.

skisteep
Senior Member
Senior Member
Posts: 192
Joined: Wed Aug 30, 2006 11:11 pm
Contact:

Postby skisteep » Wed Aug 15, 2007 8:38 am

This testing pertains to X10 commands with 1-Way devices only

Version info in top of log

Whats happening
When I send a X10 command MLLighting|OFF~Kitchen_Motion from either the ML client or the Send command line the PLC never receives it nor is there any plc enter. The status in the device control panel stays at 100 and no variables are updated.

But if I click On or OFF in the device control panel then it works

Additional notes for Mario, I have noticed that any action on a device now triggers the device control panel conditonal, it use to be just just the physical swtich press or device control panel clicks caused the conditional to trigger, not sure if this is good or bad, just different.

Also the ALL device control panel for dimmers now have the ALL option and the runtime error is fixed, thanks.

Hope this helps,
Wayne


------------------------------ Save Log ------------------------------
8/15/2007 7:17:16 AM MLLighting=1.0.0.862
8/15/2007 7:17:16 AM PLC Controller=1.1.0.416
8/15/2007 7:17:16 AM Light Controller=1.0.0.275
8/15/2007 7:17:16 AM Keypad Controller=1.0.0.284
8/15/2007 7:17:16 AM X10 Controller=1.0.0.235
8/15/2007 7:17:27 AM SDM Info: Version=1.01.138.308
8/15/2007 7:17:27 AM PLC Info: Id=08.A3.F2 IsResponding=True Firmware=2.13
8/15/2007 7:17:28 AM Sx: 08 A3 F2 07 32 0A 05 19 00
8/15/2007 7:17:29 AM SDM GetOnLevelText( 07.32.0A )=OFF
8/15/2007 7:17:29 AM GetOnLevelText( 07.32.0A )=Off
8/15/2007 7:17:29 AM Rx: 04 07 32 0A 08 A3 F2 26 00 00
8/15/2007 7:17:29 AM Msg Info: isStatus=True fromadd=07.32.0A toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=2 RemainingHops=1
8/15/2007 7:17:29 AM Sx: 08 A3 F2 09 8F BF 05 19 00
8/15/2007 7:17:30 AM SDM GetOnLevelText( 09.8F.BF )=OFF
8/15/2007 7:17:30 AM GetOnLevelText( 09.8F.BF )=Off
8/15/2007 7:17:30 AM Rx: 04 09 8F BF 08 A3 F2 25 00 00
8/15/2007 7:17:30 AM Msg Info: isStatus=True fromadd=09.8F.BF toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=1
8/15/2007 7:17:30 AM Sx: 08 A3 F2 07 40 B3 05 19 00
8/15/2007 7:17:31 AM SDM GetOnLevelText( 07.40.B3 )=ON
8/15/2007 7:17:31 AM GetOnLevelText( 07.40.B3 )=On
8/15/2007 7:17:31 AM Rx: 04 07 40 B3 08 A3 F2 27 00 FF
8/15/2007 7:17:31 AM Msg Info: isStatus=True fromadd=07.40.B3 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0xFF isBroadcast=False isGroup=False isACK=True MaxHops=3 RemainingHops=1
8/15/2007 7:17:31 AM Sx: 08 A3 F2 05 2E 89 05 19 00
8/15/2007 7:17:32 AM SDM GetOnLevelText( 05.2E.89 )=ON
8/15/2007 7:17:32 AM GetOnLevelText( 05.2E.89 )=On
8/15/2007 7:17:32 AM Rx: 04 05 2E 89 08 A3 F2 21 00 FF
8/15/2007 7:17:32 AM Msg Info: isStatus=True fromadd=05.2E.89 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0xFF isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=0
8/15/2007 7:17:32 AM Sx: 08 A3 F2 05 30 21 05 19 00
8/15/2007 7:17:33 AM SDM GetOnLevelText( 05.30.21 )=OFF
8/15/2007 7:17:33 AM GetOnLevelText( 05.30.21 )=Off
8/15/2007 7:17:33 AM Rx: 04 05 30 21 08 A3 F2 21 00 00
8/15/2007 7:17:33 AM Msg Info: isStatus=True fromadd=05.30.21 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=0
8/15/2007 7:17:33 AM Sx: 08 A3 F2 08 0C B0 05 19 00
8/15/2007 7:17:33 AM SDM GetOnLevelText( 08.0C.B0 )=OFF
8/15/2007 7:17:33 AM GetOnLevelText( 08.0C.B0 )=Off
8/15/2007 7:17:34 AM Rx: 04 08 0C B0 08 A3 F2 25 00 00
8/15/2007 7:17:34 AM Msg Info: isStatus=True fromadd=08.0C.B0 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=1

NOTE: no X10 commands for my MLServeCmd.Macro|MLLighting|OFF~Kitchen_Motion command

----------------------------------------------------------------------

User avatar
mcascio
Founder
Founder
Posts: 8270
Joined: Tue Jan 28, 2003 4:03 pm
Location: Kenosha, Wi
Contact:

Postby mcascio » Wed Aug 15, 2007 12:06 pm

Another update to PLC Controller just posted.
Mario Cascio

Cinemar, Inc.

http://www.cinemaronline.com

User avatar
jinksjj
Member
Member
Posts: 74
Joined: Mon Jan 23, 2006 12:04 pm
Contact:

Postby jinksjj » Wed Aug 15, 2007 1:20 pm

There will be another update to the PLC controller today.
It will add more x10 logging and the logging of incomming commands to the plugin.

If the x10 commands are not working 1st I would try the same command except use the lights number instead of the alias. If this works chances are that you have simply misspelled the alias. If it does not work please post more logs after updating to the latest PLC controller plugin.

skisteep
Senior Member
Senior Member
Posts: 192
Joined: Wed Aug 30, 2006 11:11 pm
Contact:

Postby skisteep » Wed Aug 15, 2007 8:22 pm

Ok all,

Same test as above with the new version, sorry but the light number wasn't the issue, please look at the log, I have annotated the sections with command sent

Just note, after the OFF command was sent, the status of the light in the PLC control panel and the variable didn't change to OFF, still shows ON

when I back rev'd to version 110347 then the X10 1-way works!!!!!!! what's the difference(hint)

8/15/2007 7:09:10 PM MLLighting=1.0.0.862
8/15/2007 7:09:10 PM PLC Controller=1.1.0.430
8/15/2007 7:09:10 PM Light Controller=1.0.0.275
8/15/2007 7:09:10 PM Keypad Controller=1.0.0.284
8/15/2007 7:09:10 PM X10 Controller=1.0.0.235
8/15/2007 7:09:21 PM SDM Info: Version=1.01.138.308
8/15/2007 7:09:21 PM PLC Info: Id=08.A3.F2 IsResponding=True Firmware=2.13
8/15/2007 7:09:22 PM Rc: light~B1~off~False
8/15/2007 7:09:22 PM Sx: B1,BOFF
8/15/2007 7:09:23 PM Rc: light~B2~off~False
8/15/2007 7:09:23 PM Sx: B2,BOFF
8/15/2007 7:09:25 PM Rc: light~07.32.0A~status
8/15/2007 7:09:25 PM Sx: 08 A3 F2 07 32 0A 05 19 00
8/15/2007 7:09:26 PM SDM GetOnLevelText( 07.32.0A )=OFF
8/15/2007 7:09:26 PM GetOnLevelText( 07.32.0A )=Off
8/15/2007 7:09:26 PM Rc: light~09.8F.BF~status
8/15/2007 7:09:26 PM Rx: 04 07 32 0A 08 A3 F2 26 00 00
8/15/2007 7:09:26 PM Msg Info: isStatus=True fromadd=07.32.0A toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=2 RemainingHops=1
8/15/2007 7:09:26 PM Sx: 08 A3 F2 09 8F BF 05 19 00
8/15/2007 7:09:27 PM SDM GetOnLevelText( 09.8F.BF )=ON
8/15/2007 7:09:27 PM GetOnLevelText( 09.8F.BF )=On
8/15/2007 7:09:27 PM Rx: 04 09 8F BF 08 A3 F2 25 00 FF
8/15/2007 7:09:27 PM Msg Info: isStatus=True fromadd=09.8F.BF toadd=08.A3.F2 Cmd1=0x00 Cmd2=0xFF isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=1
8/15/2007 7:09:27 PM Rc: light~07.40.B3~status
8/15/2007 7:09:27 PM Sx: 08 A3 F2 07 40 B3 05 19 00
8/15/2007 7:09:28 PM SDM GetOnLevelText( 07.40.B3 )=OFF
8/15/2007 7:09:28 PM GetOnLevelText( 07.40.B3 )=Off
8/15/2007 7:09:28 PM Rc: light~05.2E.89~status
8/15/2007 7:09:28 PM Rx: 04 07 40 B3 08 A3 F2 26 00 00
8/15/2007 7:09:28 PM Msg Info: isStatus=True fromadd=07.40.B3 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=2 RemainingHops=1
8/15/2007 7:09:28 PM Sx: 08 A3 F2 05 2E 89 05 19 00
8/15/2007 7:09:29 PM SDM GetOnLevelText( 05.2E.89 )=OFF
8/15/2007 7:09:29 PM GetOnLevelText( 05.2E.89 )=Off
8/15/2007 7:09:29 PM Rc: light~05.30.21~status
8/15/2007 7:09:29 PM Rx: 04 05 2E 89 08 A3 F2 21 00 00
8/15/2007 7:09:29 PM Msg Info: isStatus=True fromadd=05.2E.89 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=0
8/15/2007 7:09:29 PM Sx: 08 A3 F2 05 30 21 05 19 00
8/15/2007 7:09:30 PM SDM GetOnLevelText( 05.30.21 )=OFF
8/15/2007 7:09:30 PM GetOnLevelText( 05.30.21 )=Off
8/15/2007 7:09:30 PM Rc: light~08.0C.B0~status
8/15/2007 7:09:30 PM Rx: 04 05 30 21 08 A3 F2 21 00 00
8/15/2007 7:09:30 PM Msg Info: isStatus=True fromadd=05.30.21 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=0
8/15/2007 7:09:30 PM Sx: 08 A3 F2 08 0C B0 05 19 00
8/15/2007 7:09:31 PM SDM GetOnLevelText( 08.0C.B0 )=OFF
8/15/2007 7:09:31 PM GetOnLevelText( 08.0C.B0 )=Off
8/15/2007 7:09:31 PM Rx: 04 08 0C B0 08 A3 F2 21 00 00
8/15/2007 7:09:31 PM Msg Info: isStatus=True fromadd=08.0C.B0 toadd=08.A3.F2 Cmd1=0x00 Cmd2=0x00 isBroadcast=False isGroup=False isACK=True MaxHops=1 RemainingHops=0

ML client command MLLighting|OFF~Kitchen_Motion

8/15/2007 7:10:01 PM Rc: light~B4~off~False
8/15/2007 7:10:01 PM Sx: B4,BOFF

ML client command MLLighting|OFF~006

8/15/2007 7:12:44 PM Rc: light~B4~off~False
8/15/2007 7:12:44 PM Sx: B4,BOFF
----------------------------------------------------------------------

User avatar
mcascio
Founder
Founder
Posts: 8270
Joined: Tue Jan 28, 2003 4:03 pm
Location: Kenosha, Wi
Contact:

Postby mcascio » Thu Aug 16, 2007 12:24 pm

skisteep,

We're getting there, try the latest update and report back.
Mario Cascio

Cinemar, Inc.

http://www.cinemaronline.com

skisteep
Senior Member
Senior Member
Posts: 192
Joined: Wed Aug 30, 2006 11:11 pm
Contact:

Postby skisteep » Thu Aug 16, 2007 2:55 pm

I downloaded and installed as requested, all looks good on the X10 1-way issues, will regression test some of the other items tonight and let you know what I find.

Wayne

bigDvette
Expert
Expert
Posts: 718
Joined: Thu Oct 12, 2006 12:19 pm
Contact:

Postby bigDvette » Thu Aug 16, 2007 4:50 pm

I just installed the new version as of 4:50 on 8/16 and I am having the same issue I just posted in the other thread. Same kind of delay problem.

fnkpet
Expert
Expert
Posts: 632
Joined: Sun Nov 30, 2003 1:20 pm
Location: Charlotte, NC
Contact:

Postby fnkpet » Thu Aug 16, 2007 7:17 pm

The realease thru additional downloads is only showing mllighting .863 dated 8/15.

The thread says it should be .870

Has the Mllighing .870 been posted?

bigDvette
Expert
Expert
Posts: 718
Joined: Thu Oct 12, 2006 12:19 pm
Contact:

Postby bigDvette » Thu Aug 16, 2007 7:47 pm

I got it off the insteon plugin page

http://www.cinemaronline.com/mlserver.mllighting.html

fnkpet
Expert
Expert
Posts: 632
Joined: Sun Nov 30, 2003 1:20 pm
Location: Charlotte, NC
Contact:

Postby fnkpet » Thu Aug 16, 2007 9:16 pm

Yeah that works. Thanks

User avatar
mcascio
Founder
Founder
Posts: 8270
Joined: Tue Jan 28, 2003 4:03 pm
Location: Kenosha, Wi
Contact:

Postby mcascio » Fri Aug 17, 2007 11:08 am

Sorry - version # has been corrected.
Mario Cascio

Cinemar, Inc.

http://www.cinemaronline.com

Near76
Intermediate
Intermediate
Posts: 436
Joined: Sun Jul 18, 2004 7:45 am
Contact:

Postby Near76 » Fri Aug 17, 2007 9:29 pm

Still having problems...here is what is happening:

1) Local changes are not reflected in the plugin device status. If I locally turn on a dimmer the status does not change, but if I hit the 'On' button again (with the light already on) it does...the same happens with 'Off', the first time the plugin does not update, but the second time it does.

2) Now that the plugin polls after group commands I cannot do anything in MLS for 2 minutes after I hit All Lights Off...which causes MLS to poll 54 dimmers. Can this be made optional?
-Matt


Return to “Insteon”

Who is online

Users browsing this forum: No registered users and 1 guest