A functioning MLHAL security scene with Honeywell graphics

User avatar
jeffx
Intermediate
Intermediate
Posts: 256
Joined: Mon Jun 26, 2006 9:36 am
Location: Upstate NY
Contact:

A functioning MLHAL security scene with Honeywell graphics

Postby jeffx » Wed Sep 06, 2006 11:03 pm

I made a functioning Security scene for HAL2000 using graphics for a Honeywell/Ademco Vista keypad. Any MLHAL users should be able to use this with about 5 minutes of effort on your part. Requires ML3, MLS3 and MLHAL 2.1.0.2 or newer, no additional graphics libraries needed.

Just extract the mls into the Cinemar directory and the image file into the Cinemar\images directory.

Change the zone names for your needs.

Setup 3 Rules and 1 Macro in HAL:

If Security Armed in Home Mode Run Program "C:\Program FIles\MLServer\MLServer.exe" Paramenters "MLServeCmd.SetVariable|AlarmStatus~ARMED STAY"

If Security Armed in Away Mode Run Program "C:\Program FIles\MLServer\MLServer.exe" Paramenters "MLServeCmd.SetVariable|AlarmStatus~ARMED AWAY"

If Security Disarmed Run Program "C:\Program FIles\MLServer\MLServer.exe" Paramenters "MLServeCmd.SetVariable|AlarmStatus~DISARMED"

MACRO: ARM HOME = Arm Security System in Home Mode


** The 4th fuction button on the keypad will reset the password you enter (in case you mis-press). It will also display the password as entered so far. This is the HAL security password, not the panel password that is needed (although you may have set them the same). Pressing disarm also blanks/resets the password entered after sending the disarm command to HAL.
You do not have the required permissions to view the files attached to this post.
Last edited by jeffx on Thu Sep 07, 2006 12:48 pm, edited 4 times in total.
HAL2000 - JRMC 11 - ML3 - MuL3 - NetRemote Pro 1 - Insteon - M-Audio Delta 410 - Sonic Impact T-Amps - Honeywell Security

User avatar
jeffx
Intermediate
Intermediate
Posts: 256
Joined: Mon Jun 26, 2006 9:36 am
Location: Upstate NY
Contact:

Postby jeffx » Wed Sep 06, 2006 11:10 pm

here is a screenshot.
You do not have the required permissions to view the files attached to this post.
HAL2000 - JRMC 11 - ML3 - MuL3 - NetRemote Pro 1 - Insteon - M-Audio Delta 410 - Sonic Impact T-Amps - Honeywell Security


Return to “HAL”

Who is online

Users browsing this forum: No registered users and 1 guest