777es stuck in poweron~1 loop

User avatar
rtarver
Senior Member
Senior Member
Posts: 118
Joined: Fri Dec 23, 2005 6:51 pm
Contact:

777es stuck in poweron~1 loop

Postby rtarver » Fri Dec 26, 2008 8:30 pm

Somehow things have gotten hosed up. Whenever I run a poweron test, mlcx777es and mlserver, get stuck in a repeating loop of poweron~1. This repeats until it finally times out and dies. The command actually works correctly, but mlserver never recovers. I had this working fine previously, but I've rewritten pages (which shouldn't effect the server) and now it doesn't work.

Any thoughts?

Thanks, Russ

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Postby CinemarDave » Fri Dec 26, 2008 10:08 pm

You need to see where you are calling these extra power on commands from. Most likely you have defined an automation rule that is triggering or a macro is somehow calling itself. Post the MLServer event log as it might give some clue as to where to look.

sbuckler
Intermediate
Intermediate
Posts: 349
Joined: Tue Feb 11, 2003 8:17 am
Location: Cape Cod
Contact:

Postby sbuckler » Sat Dec 27, 2008 6:30 am

I recently had the same problem. I did have a macro firing another macro I had done for testing and I cleaned up MLCyclestates. Problem is gone now.

Stan


Return to “Sony”

Who is online

Users browsing this forum: No registered users and 1 guest