Change to Video Input 1-8 on Sony 50"SXRD KDS-R50XBR

iceman0304
New Member
New Member
Posts: 29
Joined: Tue May 31, 2005 5:29 pm
Location: USA
Contact:

Change to Video Input 1-8 on Sony 50"SXRD KDS-R50XBR

Postby iceman0304 » Sun Feb 18, 2007 6:34 pm

OK I FIGURED IT OUT.. FINALLY !!! Hopefully this can help some others... There are 2 ways to get there the first is the best. At least in my case.

I'm using Cinemar's Mainlobby software w/ Global Cache

Remote Central's Discrete Codes in ProtoEdit Software (Sony - television)

Direct Video inputs
video 1,2,3,4,5,6,7,8 & tuner

If the discrete code doesn't work for you, this is what I came up with for my situation. And works for me.. The Discrete code itself would not work for my TV. (Make sure that you have no extra spaces at the end of the code, in the database where your code is stored, I found them in mine, it prevented the code from working)

Example 1 (this is using the Discrete code but it needs to be written back to back, so your writing the the code twice.)

0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a

this is the code give here in remote central. Now just put a space at the end and paste it again. like so

0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a 0000 0067 0000 000d 0061 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0018 0018 0018 0018 0018 043a

Example 2 (this is by pressing the "ANT" button then the "TV/Video" button...)

to goto video 5 you would press the "ANT" button once then the "TV/Video" button 5 times. This is the same for all the inputs 1 - tv/video once, input 2 - tv/video twice and so on...

This is a goofy way sometimes cause if you hit the "ANT" button then slowly hit the "TV/video" and goto say input 5 and you want to go back to the tuner, you might be stuck in the ANT input so you have to hit the "ANT" button again... but if it went to the input just rite you can just hit the Channel up or down to go back to the tuner..This is the only way I can figure...


So I recommend the first example..

You can set the Global Cache to repeat the code also, but this affected the numbers for the channels, you could make a seperate Device...

Hopefully this helps!!!

Return to “Sony”

Who is online

Users browsing this forum: No registered users and 1 guest