MLGC Macro problem

User avatar
rondepping
Expert
Expert
Posts: 638
Joined: Sat Jan 08, 2005 9:18 pm
Location: Grand Blanc, Mi
Contact:

MLGC Macro problem

Postby rondepping » Mon Feb 18, 2013 9:41 am

I've just started converting my IR to the iTach IP2IR modules and I'm running into a problem.

Since these are just SendIR commands with delays in between ( a LED HDTV that takes a while to power on ) I decided to see if I could use the MLGC macro instead. It didn't seem to work, it looks like all the delays are happening first then the commands are actually sent.

I simplified the macro down to power on , delay 30 , switch input.

Macro:
SendIR~LGTV1~POWER-ON
Delay~30
SendIR~LGTV1~ACV1

The log shows that the 1st command are being sent and then the delay then the next command, but after the sum of the delays only the 1st command seemed to be really sent. ( log below )

I ran wireshark to see what was happening on the TCP level, and the commands are being sent one after the other with no delay, happening after the delay. So my 2nd command is being ignored by the TV since it is not ready to accept it yet.

Is there a setting that I missed? I'm using MLSERVER 4.0.4792.32040 and MLGC 3.99.52

MLGC Log:
2/18/2013 9:25:44 AM CMD: [DoMacro~Theater On1]
2/18/2013 9:25:44 AM Macro: SendIR~LGTV1~POWER-ON
2/18/2013 9:25:44 AM CMD: [SendIR~LGTV1~POWER-ON]
2/18/2013 9:25:44 AM Pronto IR [0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94]
2/18/2013 9:25:44 AM TX: [sendir,2:3,363,38000,3,1,343,172,21,22,21,22,21,65,21,22,21,22,21,22,21,22,21,22,21,65,21,65,21,22,21,65,21,65,21,65,21,65,21,65,21,22,21,22,21,65,21,22,21,22,21,22,21,65,21,65,21,65,21,65,21,22,21,65,21,65,21,65,21,22,21,22,21,1673,343,86,21,3732]
2/18/2013 9:25:44 AM Macro: Delay~30
2/18/2013 9:25:44 AM CMD: [Delay~30]
2/18/2013 9:26:14 AM Macro: SendIR~LGTV1~ACV1
2/18/2013 9:26:14 AM CMD: [SendIR~LGTV1~ACV1]
2/18/2013 9:26:14 AM Pronto IR [0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0689 0157 0056 0015 0E94]
2/18/2013 9:26:14 AM TX: [sendir,2:3,363,38000,3,1,343,172,21,22,21,22,21,65,21,22,21,22,21,22,21,22,21,22,21,65,21,65,21,22,21,65,21,65,21,65,21,65,21,65,21,22,21,65,21,22,21,65,21,65,21,22,21,65,21,22,21,65,21,22,21,65,21,22,21,22,21,65,21,22,21,65,21,1673,343,86,21,3732]
2/18/2013 9:26:14 AM Macro:
2/18/2013 9:26:15 AM RX:Beacon#0 (128.200.3.162) [AMXB<-UUID=GlobalCache_000C1E0257CC><-SDKClass=Utility><-Make=GlobalCache><-Model=iTachIP2IR><-Revision=710-1005-05><-Pkg_Level=GCPK002><-Config-URL=http://128.200.3.162><-PCB_PN=025-0028-03><-Status=Ready>
]
2/18/2013 9:26:15 AM ProcessEvent: MacAddr[000C1E0257CC] Address[128.200.3.162] Model[iTachIP2IR]
2/18/2013 9:26:16 AM NET TX: sendir,2:3,363,38000,3,1,343,172,21,22,21,22,21,65,21,22,21,22,21,22,21,22,21,22,21,65,21,65,21,22,21,65,21,65,21,65,21,65,21,65,21,22,21,22,21,65,21,22,21,22,21,22,21,65,21,65,21,65,21,65,21,22,21,65,21,65,21,65,21,22,21,22,21,1673,343,86,21,3732

2/18/2013 9:26:16 AM RX:Beacon#0 (128.200.3.114) [AMXB<-UUID=GlobalCache_000C1E022CD3><-SDKClass=Utility><-Make=GlobalCache><-Model=iTachIP2IR><-Revision=710-1005-04><-Pkg_Level=GCPK001><-Config-URL=http://128.200.3.114><-PCB_PN=025-0028-03><-Status=Ready>
]
2/18/2013 9:26:16 AM ProcessEvent: MacAddr[000C1E022CD3] Address[128.200.3.114] Model[iTachIP2IR]
2/18/2013 9:26:16 AM NET TX: sendir,2:3,363,38000,3,1,343,172,21,22,21,22,21,65,21,22,21,22,21,22,21,22,21,22,21,65,21,65,21,22,21,65,21,65,21,65,21,65,21,65,21,22,21,65,21,22,21,65,21,65,21,22,21,65,21,22,21,65,21,22,21,65,21,22,21,22,21,65,21,22,21,65,21,1673,343,86,21,3732

2/18/2013 9:26:16 AM RX:Beacon#0 (128.200.3.121) [AMXB<-UUID=GlobalCache_000C1E025709><-SDKClass=Utility><-Make=GlobalCache><-Model=iTachIP2IR><-Revision=710-1005-05><-Pkg_Level=GCPK002><-Config-URL=http://128.200.3.121><-PCB_PN=025-0028-03><-Status=Ready>
]


Thanks,
Ron Depping

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: MLGC Macro problem

Postby CinemarDave » Mon Feb 18, 2013 3:26 pm

Give the version of MLGC I just released a test. See if the macro behaves better. Let me know what happens.

User avatar
rondepping
Expert
Expert
Posts: 638
Joined: Sat Jan 08, 2005 9:18 pm
Location: Grand Blanc, Mi
Contact:

Re: MLGC Macro problem

Postby rondepping » Tue Feb 19, 2013 7:53 am

Dave,

That fixed it.

Thank you!

Ron Depping


Return to “Global Cache”

Who is online

Users browsing this forum: No registered users and 1 guest