Page 1 of 1

Problems changing active city

Posted: Fri Aug 26, 2011 6:36 pm
by albright_family
I have been updating a few of my scenes, and wanted to add weather data for family that lives on the East Coast (I live on the West coast), I set up the new locations in MLWeather, I then setup buttons which fire off the following commands:
MLWeatherLobby|Active~{{mlweather_location_2_ID}} which then fires in the Events pages as
Active~USSC0182

But none of the weather information updates to show the different city's information. Am I missing something?

Please help.

Russell

Re: Problems changing active city

Posted: Sat Aug 27, 2011 12:03 pm
by CinemarDave
Look in the MLServer\Data folder. do you have a USSC0182.xml file there? If no then no weather is being downloaded. If yes delete the one that is there and issue the command again to see if you get an updated xml file. Let me know the results.

Re: Problems changing active city

Posted: Sat Aug 27, 2011 1:44 pm
by albright_family
no xml files were in that folder... Hmmmm...

Re: Problems changing active city

Posted: Sat Aug 27, 2011 2:36 pm
by CinemarDave
If there are no xml files then MLWorker is not able to download the weather report. Can you look at the MLWorker Agent event log while you issue the command. You should see the request and then the download event.

Re: Problems changing active city

Posted: Sat Aug 27, 2011 4:10 pm
by albright_family
I am looking at the logs for MLWorker Agent Gateway here is what it is showing:


8/27/2011 2:08:16 PM Agent connection has closed
8/27/2011 2:08:16 PM Attempting to connect to the Agent
8/27/2011 2:08:21 PM Agent connection has closed
8/27/2011 2:08:21 PM Attempting to connect to the Agent
8/27/2011 2:08:26 PM Agent connection has closed
8/27/2011 2:08:26 PM Attempting to connect to the Agent
8/27/2011 2:08:31 PM Agent connection has closed
8/27/2011 2:08:31 PM Attempting to connect to the Agent
8/27/2011 2:08:36 PM Agent connection has closed
8/27/2011 2:08:36 PM Attempting to connect to the Agent
8/27/2011 2:08:41 PM Agent connection has closed
8/27/2011 2:08:41 PM Attempting to connect to the Agent
8/27/2011 2:08:46 PM Agent connection has closed
8/27/2011 2:08:46 PM Attempting to connect to the Agent
8/27/2011 2:08:51 PM Agent connection has closed
8/27/2011 2:08:51 PM Attempting to connect to the Agent
8/27/2011 2:08:56 PM Agent connection has closed
8/27/2011 2:08:56 PM Attempting to connect to the Agent
8/27/2011 2:09:01 PM Agent connection has closed
8/27/2011 2:09:01 PM Attempting to connect to the Agent
8/27/2011 2:09:06 PM Agent connection has closed
8/27/2011 2:09:06 PM Attempting to connect to the Agent
8/27/2011 2:09:11 PM Agent connection has closed
8/27/2011 2:09:11 PM Attempting to connect to the Agent
8/27/2011 2:09:15 PM SendText [GetXMLFile~http://datapump.cinemaronline.com/Intellicast.php?id=USSC0182~C:\Program Files\MLServer\Data\AdvUSSC0182.xml~MLWeatherLobby|LoadXMLAdv~C:\Program Files\MLServer\Data\AdvUSSC0182.xml] as client []
8/27/2011 2:09:15 PM SendCommand Error: Failed to send since Worker has disconnected
8/27/2011 2:09:17 PM Agent connection has closed
8/27/2011 2:09:17 PM Attempting to connect to the Agent
8/27/2011 2:09:19 PM SendText [GetXMLFile~http://datapump.cinemaronline.com/Intellicast.php?id=USSC0182~C:\Program Files\MLServer\Data\AdvUSSC0182.xml~MLWeatherLobby|LoadXMLAdv~C:\Program Files\MLServer\Data\AdvUSSC0182.xml] as client []
8/27/2011 2:09:19 PM SendCommand Error: Failed to send since Worker has disconnected
8/27/2011 2:09:22 PM Agent connection has closed
8/27/2011 2:09:22 PM Attempting to connect to the Agent
8/27/2011 2:09:27 PM Agent connection has closed
8/27/2011 2:09:27 PM Attempting to connect to the Agent
8/27/2011 2:09:32 PM Agent connection has closed
8/27/2011 2:09:32 PM Attempting to connect to the Agent
8/27/2011 2:09:37 PM Agent connection has closed
8/27/2011 2:09:38 PM Attempting to connect to the Agent
8/27/2011 2:09:40 PM SendText [CheckInternet~192.168.2.9] as client []
8/27/2011 2:09:40 PM SendCommand Error: Failed to send since Worker has disconnected

What could be causing this I wonder?

Re: Problems changing active city

Posted: Sat Aug 27, 2011 4:12 pm
by CinemarDave
The MLWorker_Agent.exe cannot run. Try starting it be hand to see if it is complaining about something.

Re: Problems changing active city

Posted: Sat Aug 27, 2011 4:23 pm
by albright_family
Okay so I closed the program out and manually loaded by running the MLWorker_Agent.exe in the MLServer folder and it launches just fine without complaints, yet MLServer is still not connecting to it.

Re: Problems changing active city

Posted: Sat Aug 27, 2011 4:33 pm
by CinemarDave
Then most likely something is blocking the port preventing the connection. Is windows firewall running?

Re: Problems changing active city

Posted: Sat Aug 27, 2011 4:52 pm
by albright_family
Windows firewall has been disabled for a while, I even tried changing the port number. I am trying a full system reboot. I will report if this helps.

Re: Problems changing active city

Posted: Sat Aug 27, 2011 5:40 pm
by albright_family
Okay a system reboot fixed it, I wonder what caused it to stop working.