DVDLobby 3.90.x Questions

Please post general questions about DVDLobby here
neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sat Aug 07, 2010 3:45 pm

Man, I was hoping you would put on your Superman cape and come to my rescue. Thanks!! Like I said, I feel like this issue is so simple, but it's blocking me from opening Content Mgr. I got the same results even with the share on MLServer. So please tell me what I am doing wrong.

I went to the folder e:\program files\cinemar\mlserver, shared it, called it MLServer. Then when I open Content Mgr, it gives me the folder browse window, I drill down to +My Network Places+MLServer on CINEMA, I see the following at the top E:\Documents and Settings\Administrator\NetHood\MLServer on CINEMA, and when I click OK, it just keeps opening a new folder browse window, as if not to accept my choice. It feels that no matter what directory I enter, it's not accepted.

Can't wait to get Content Mgr open, any ideas ???

Thanks

neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sat Aug 07, 2010 3:48 pm

Could it be that Content Mgr is screwed up and did not install properly ? Even if I hit cancel to exit the folder browse window for MLServer, it keeps popping up a new folder browse window. I am tempted to rip out Content Mgr and install it again. Hoping I can do so from ML Installer.

Nope, scratch that idea, removed Content Mgr, reinstalled thru MLInstaller, and same results. Folder browse window just keeps looping no matter what folder I select, whether it be the shared MLServer folder or anything else

Thanks
Last edited by neils on Sat Aug 07, 2010 3:55 pm, edited 1 time in total.

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: DVDLobby 3.90.x Questions

Postby CinemarDave » Sat Aug 07, 2010 3:54 pm

Does your folder tree look something like this? I don't have a "My Network Places" choice.

CM.png
You do not have the required permissions to view the files attached to this post.

neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sat Aug 07, 2010 4:25 pm

This is what I see, that keeps looping...
You do not have the required permissions to view the files attached to this post.

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: DVDLobby 3.90.x Questions

Postby CinemarDave » Sat Aug 07, 2010 4:26 pm

Expand "Entire Network" and follow down that path until you find your MLServer share.

neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sat Aug 07, 2010 4:37 pm

Makes sense, you had my hopes up, but stil getting the loop. When I select the share shown below, you can see the top pointing to \\<PC>\MLServer now, but I just don't know why that window keeps looping and does not accept the shared folder,
You do not have the required permissions to view the files attached to this post.

neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sat Aug 07, 2010 4:42 pm

As soon as I hit OK, the window above closes, and it loops to the folder browse window again like this
You do not have the required permissions to view the files attached to this post.

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: DVDLobby 3.90.x Questions

Postby CinemarDave » Sat Aug 07, 2010 5:04 pm

Then you either do not have permission to access the folder or the wrong folder was shared. The folder permissions should be "Everyone" = "Full Control" and the \Program Files\MLServer folder must be the shared folder and not a sub-folder.

neils
Senior Member
Senior Member
Posts: 135
Joined: Mon Sep 22, 2003 11:19 pm
Contact:

Re: DVDLobby 3.90.x Questions

Postby neils » Sun Aug 08, 2010 10:18 pm

JACKPOT!!! YES!! You nailed it. I had 2 MLServer folders, one under \Program Files\Cinemar\MLServer (which I was sharing incorrectly), and the other one which the tool requires under \Program Files\MLServer. I am now able to get into Content Mgr.

Thanks for the info, hope nobody else runs into this problem. especially guys like me who dont play around in these tools too much other than to run the basics.

Thanks again for your time, cant wait to get 3.9 setup and running again. And expect my payment, I always upgrade to stay recent.

Appreciate it !!!

Neil
Montreal, Canada

User avatar
maik
Senior Member
Senior Member
Posts: 208
Joined: Sat Mar 10, 2007 12:46 pm
Location: North Bay, Ontario, Canada
Contact:

Re: DVDLobby 3.90.x Questions

Postby maik » Sun Jan 15, 2012 11:29 am

So what is the new 995 changer command now for changing the changerlocation numbers?

I had this, but now it stopped working.

Code: Select all

MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!
MLPause|2.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~display!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~right!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION1>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION2>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION3>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~enter!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~Display!

Maik1

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: DVDLobby 3.90.x Questions

Postby CinemarDave » Sun Jan 15, 2012 12:09 pm

Nothing has changed in DVDLobby 3.9x. What does the MLServer event log look like when you issue the play command?

User avatar
maik
Senior Member
Senior Member
Posts: 208
Joined: Sat Mar 10, 2007 12:46 pm
Location: North Bay, Ontario, Canada
Contact:

Re: DVDLobby 3.90.x Questions

Postby maik » Sun Jan 15, 2012 1:22 pm

Code: Select all

15/01/12 1:15:24 PM   Processing (1)   Dell-Remote   MLServeCmd.MLGC100|DoMacro~dvds on
15/01/12 1:15:24 PM   Processing (1)   Dell-Remote   MLServeCmd.Macro|MLCmd|ChangeScene~{{clientname}}~pleasewait.mls
15/01/12 1:15:24 PM   Processing (2)   Dell-Remote   MLCmd|ChangeScene~{{clientname}}~pleasewait.mls
15/01/12 1:15:24 PM   Subst In   Dell-Remote   ChangeScene~{{clientname}}~pleasewait.mls
15/01/12 1:15:24 PM   Subst Out   Dell-Remote   ChangeScene~Dell-Remote~pleasewait.mls
15/01/12 1:15:24 PM   Processing (1)   Dell-Remote   MLServeCmd.Setvariable|DVDLobby~ks
15/01/12 1:15:24 PM   Processing (1)   Dell-Remote   SetScene|currentscene=pleasewait.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:15:27 PM   Processing (1)   Dell-Remote   MLServeCmd.MLCmd|ChangeScene~{{clientname}}~Movies\Movies_Console_Thumbs.mls
15/01/12 1:15:27 PM   Subst In   Dell-Remote   ChangeScene~{{clientname}}~Movies\Movies_Console_Thumbs.mls
15/01/12 1:15:27 PM   Subst Out   Dell-Remote   ChangeScene~Dell-Remote~Movies\Movies_Console_Thumbs.mls
15/01/12 1:15:27 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Thumbs.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:15:27 PM   Processing (1)   Dell-Remote   Macro|MLCmd|{{clientname}}~SetProperty|3~move~0~0~1!MLDVDLobby|InitBrowser~Thumbs~12~200~300~130~195
15/01/12 1:15:27 PM   Processing (2)   Dell-Remote   MLCmd|{{clientname}}~SetProperty|3~move~0~0~1
15/01/12 1:15:27 PM   Subst In   Dell-Remote   {{clientname}}~SetProperty|3~move~0~0~1
15/01/12 1:15:28 PM   Subst Out   Dell-Remote   Dell-Remote~SetProperty|3~move~0~0~1
15/01/12 1:15:28 PM   Processing (2)   Dell-Remote   MLDVDLobby|InitBrowser~Thumbs~12~200~300~130~195
15/01/12 1:15:28 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Thumbs.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Console.mls
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   Macro|MLDVDLobby|SetActiveThumb~6!MLDVDLobby|GetMovie~{{Movies_dvdNumber_6_{{clientname}}}}~1!MLCmd|ChangeScene~{{clientname}}~Movies\Movies_Console_Details.mls
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   MLDVDLobby|SetActiveThumb~6
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   MLDVDLobby|GetMovie~{{Movies_dvdNumber_6_{{clientname}}}}~1
15/01/12 1:15:31 PM   Subst In   Dell-Remote   GetMovie~{{Movies_dvdNumber_6_{{clientname}}}}~1
15/01/12 1:15:31 PM   Subst Out   Dell-Remote   GetMovie~67204~1
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   MLCmd|ChangeScene~{{clientname}}~Movies\Movies_Console_Details.mls
15/01/12 1:15:31 PM   Subst In   Dell-Remote   ChangeScene~{{clientname}}~Movies\Movies_Console_Details.mls
15/01/12 1:15:31 PM   Subst Out   Dell-Remote   ChangeScene~Dell-Remote~Movies\Movies_Console_Details.mls
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   SetVariableFast|Movies_LastView_{{clientname}}~thumbs
15/01/12 1:15:31 PM   Subst In   Dell-Remote   Movies_LastView_{{clientname}}~thumbs
15/01/12 1:15:31 PM   Subst Out   Dell-Remote   Movies_LastView_Dell-Remote~thumbs
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Details.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Console.mls
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   Macro|MLDVDLobby|InitDetails~200~300!MLDVDLobby|InitSimilar~18~200~300~130~195
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   MLDVDLobby|InitDetails~200~300
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   MLDVDLobby|InitSimilar~18~200~300~130~195
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Details.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:15:31 PM   Processing (1)   Dell-Remote   Macro|SetVariable|dvdcurrentselection_tab_{{clientname}}~synopsis!SetVariable|dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   SetVariable|dvdcurrentselection_tab_{{clientname}}~synopsis
15/01/12 1:15:31 PM   Subst In   Dell-Remote   dvdcurrentselection_tab_{{clientname}}~synopsis
15/01/12 1:15:31 PM   Subst Out   Dell-Remote   dvdcurrentselection_tab_Dell-Remote~synopsis
15/01/12 1:15:31 PM   Processing (2)   Dell-Remote   SetVariable|dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:15:31 PM   Subst In   Dell-Remote   dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:15:31 PM   Subst Out   Dell-Remote   dvdcurrentselection_displaytext_Dell-Remote~
15/01/12 1:15:33 PM   Processing (1)   Dell-Remote   SetVariable|Movies_View_Type_{{Clientname}}~Selection
15/01/12 1:15:33 PM   Subst In   Dell-Remote   Movies_View_Type_{{Clientname}}~Selection
15/01/12 1:15:33 PM   Subst Out   Dell-Remote   Movies_View_Type_Dell-Remote~Selection
15/01/12 1:15:33 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Play.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:15:34 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Play.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Cancel_Nav.mls
15/01/12 1:16:13 PM   Processing (1)   Dell-Remote   MLDVDLobby|PlayMovie~{{Movies_{{Movies_View_Type_{{Clientname}}}}_dvdNumber_{{clientname}}}}~{{Movies_{{Movies_View_Type_{{Clientname}}}}_DiscNumber_{{clientname}}}}
15/01/12 1:16:13 PM   Subst In   Dell-Remote   PlayMovie~{{Movies_{{Movies_View_Type_{{Clientname}}}}_dvdNumber_{{clientname}}}}~{{Movies_{{Movies_View_Type_{{Clientname}}}}_DiscNumber_{{clientname}}}}
15/01/12 1:16:13 PM   Subst Out   Dell-Remote   PlayMovie~67204~1
15/01/12 1:16:14 PM   Processing (2)   Dell-Remote   MLServeCmd.MLConditional|IsEqual##{{movies_nowplaying_changernumber}}##4##Macro|playbluray##MLServeCmd.Macro|playdvd
15/01/12 1:16:14 PM   Subst In   Dell-Remote   IsEqual##{{movies_nowplaying_changernumber}}##4##Macro|playbluray##MLServeCmd.Macro|playdvd
15/01/12 1:16:14 PM   Subst Out   Dell-Remote   IsEqual####4##Macro|playbluray##MLServeCmd.Macro|playdvd
15/01/12 1:16:14 PM   Processing (3)   Dell-Remote   MLServeCmd.Macro|playdvd
15/01/12 1:16:14 PM   Processing (4)   Dell-Remote   playdvd
15/01/12 1:16:14 PM   Processing (5)   Dell-Remote   Macro|MLDVDLobby|SETSOURCE~<<CHANGERNUMBER>>!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!MLPause|2.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~display!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~right!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION1>>!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION2>>!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION3>>!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~enter!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~Display!MLPause|3.5!MLGC100|DoMacro~DVD<<CHANGERNUMBER>>!MLPause|1.5!MLGC100|SendIR~HDMI~<<CHANGERNUMBER>>!MLPause|1.5!MLGC100|SendIR~inday~<<CHANGERNUMBER>>!MLPause|1.5!MLGC100|SendIR~DVD<<CHANGERNUMBER>>~play!MLPause|1.5!MLServeCmd.Setvariable|varidvd~<<CHANGERNUMBER>>!MLCmd|ChangeScene~{{clientname}}~{{DVDLobby}}VARIDVD1.mls
15/01/12 1:16:14 PM   Processing (6)   Dell-Remote   MLDVDLobby|SETSOURCE~<<CHANGERNUMBER>>
15/01/12 1:16:14 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop
15/01/12 1:16:14 PM   Processing (6)   Dell-Remote   MLPause|2.5
15/01/12 1:16:16 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop
15/01/12 1:16:16 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:18 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~display
15/01/12 1:16:18 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:19 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~right
15/01/12 1:16:19 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:21 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION1>>
15/01/12 1:16:21 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:22 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION2>>
15/01/12 1:16:22 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:24 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION3>>
15/01/12 1:16:24 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:25 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~enter
15/01/12 1:16:25 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:27 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~Display
15/01/12 1:16:27 PM   Processing (6)   Dell-Remote   MLPause|3.5
15/01/12 1:16:31 PM   Processing (6)   Dell-Remote   MLGC100|DoMacro~DVD<<CHANGERNUMBER>>
15/01/12 1:16:31 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:32 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~HDMI~<<CHANGERNUMBER>>
15/01/12 1:16:32 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:34 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~inday~<<CHANGERNUMBER>>
15/01/12 1:16:34 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:35 PM   Processing (6)   Dell-Remote   MLGC100|SendIR~DVD<<CHANGERNUMBER>>~play
15/01/12 1:16:35 PM   Processing (6)   Dell-Remote   MLPause|1.5
15/01/12 1:16:37 PM   Processing (6)   Dell-Remote   MLServeCmd.Setvariable|varidvd~<<CHANGERNUMBER>>
15/01/12 1:16:37 PM   Processing (6)   Dell-Remote   MLCmd|ChangeScene~{{clientname}}~{{DVDLobby}}VARIDVD1.mls
15/01/12 1:16:37 PM   Subst In   Dell-Remote   ChangeScene~{{clientname}}~{{DVDLobby}}VARIDVD1.mls
15/01/12 1:16:37 PM   Subst Out   Dell-Remote   ChangeScene~Dell-Remote~ksVARIDVD1.mls
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Details.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Cancel_Nav.mls
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   Macro|MLDVDLobby|InitDetails~200~300!MLDVDLobby|InitSimilar~18~200~300~130~195
15/01/12 1:16:37 PM   Processing (2)   Dell-Remote   MLDVDLobby|InitDetails~200~300
15/01/12 1:16:37 PM   Processing (2)   Dell-Remote   MLDVDLobby|InitSimilar~18~200~300~130~195
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   SetScene|currentscene=Movies\Movies_Console_Details.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   Macro|SetVariable|dvdcurrentselection_tab_{{clientname}}~synopsis!SetVariable|dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:16:37 PM   Processing (2)   Dell-Remote   SetVariable|dvdcurrentselection_tab_{{clientname}}~synopsis
15/01/12 1:16:37 PM   Subst In   Dell-Remote   dvdcurrentselection_tab_{{clientname}}~synopsis
15/01/12 1:16:37 PM   Subst Out   Dell-Remote   dvdcurrentselection_tab_Dell-Remote~synopsis
15/01/12 1:16:37 PM   Processing (2)   Dell-Remote   SetVariable|dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:16:37 PM   Subst In   Dell-Remote   dvdcurrentselection_displaytext_{{clientname}}~{{dvdcurrentselection_overview_{{clientname}}}}
15/01/12 1:16:37 PM   Subst Out   Dell-Remote   dvdcurrentselection_displaytext_Dell-Remote~
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   SetScene|currentscene=ksVARIDVD1.mls~currentoverlay=Movies\Movies_Layer_Thumbs_2x6.mls~currentoverlay2=Movies\Movies_Layer_Detail_Nav.mls
15/01/12 1:16:37 PM   Processing (1)   Dell-Remote   MLServeCmd.MLGC100|GetState~butt


This is the GC100 log

Code: Select all

Got: [DoMacro~dvds on]
Macro: MLServeCmd.Macro|MLCmd|ChangeScene~{{clientname}}~pleasewait.mls
Macro: sendIR~DVD1~poweron
Got: [sendIR~DVD1~poweron]
Pronto IR [0000 0067 0000 0015 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0211]
Sent: [sendir,4:1,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529]
OpenTCPPort at 192.168.1.72 on port 4998
TCPPort is already open
Connect: [sendir,4:1,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529
]
Rcvd: [completeir,4:1,363
] from IP: [192.168.1.72]
Macro: Delay~1
Got: [Delay~1]
Macro: sendIR~DVD2~poweron
Got: [sendIR~DVD2~poweron]
Pronto IR [0000 0067 0000 0015 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0211]
Sent: [sendir,4:2,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529]
OpenTCPPort at 192.168.1.72 on port 4998
TCPPort is already open
Connect: [sendir,4:2,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529
]
Rcvd: [completeir,4:2,363
] from IP: [192.168.1.72]
Macro: Delay~1
Got: [Delay~1]
Macro: sendIR~DVD3~poweron
Got: [sendIR~DVD3~poweron]
Pronto IR [0000 0067 0000 0015 0060 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0211]
Sent: [sendir,4:3,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529]
OpenTCPPort at 192.168.1.72 on port 4998
TCPPort is already open
Connect: [sendir,4:3,363,40200,3,1,96,24,24,24,48,24,48,24,48,24,24,24,48,24,24,24,24,24,48,24,24,24,48,24,48,24,48,24,24,24,24,24,48,24,24,24,24,24,48,24,24,529
]
Rcvd: [completeir,4:3,363
] from IP: [192.168.1.72]
Macro: Delay~1
Got: [Delay~1]
Macro: sendIR~DVD4~poweron
Got: [sendIR~DVD4~poweron]
Pronto IR [0000 0069 0000 0015 005F 0017 0017 0017 0030 0017 0030 0017 0030 0017 0017 0017 0030 0017 0017 0017 0017 0017 0030 0017 0017 0017 0030 0017 0030 0017 0017 0017 0030 0017 0017 0017 0017 0017 0017 0017 0030 0017 0030 0017 0030 0200]
Sent: [sendir,5:2,363,39500,3,1,95,23,23,23,48,23,48,23,48,23,23,23,48,23,23,23,23,23,48,23,23,23,48,23,48,23,23,23,48,23,23,23,23,23,23,23,48,23,48,23,48,512]
OpenTCPPort at 192.168.1.72 on port 4998
TCPPort is already open
Connect: [sendir,5:2,363,39500,3,1,95,23,23,23,48,23,48,23,48,23,23,23,48,23,23,23,23,23,48,23,23,23,48,23,48,23,23,23,48,23,23,23,23,23,23,23,48,23,48,23,48,512
]
Rcvd: [completeir,5:2,363
] from IP: [192.168.1.72]
Macro: MLServeCmd.MLCmd|ChangeScene~{{clientname}}~Movies\Movies_Console_Thumbs.mls
Got: [SendIR~DVD<<CHANGERNUMBER>>~stop]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/stop]
Got: [SendIR~DVD<<CHANGERNUMBER>>~stop]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/stop]
Got: [SendIR~DVD<<CHANGERNUMBER>>~display]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/display]
Got: [SendIR~DVD<<CHANGERNUMBER>>~right]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/right]
Got: [SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION1>>]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/<<CHANGERLOCATION1>>]
Got: [SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION2>>]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/<<CHANGERLOCATION2>>]
Got: [SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION3>>]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/<<CHANGERLOCATION3>>]
Got: [SendIR~DVD<<CHANGERNUMBER>>~enter]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/enter]
Got: [SendIR~DVD<<CHANGERNUMBER>>~Display]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/Display]
Got: [DoMacro~DVD<<CHANGERNUMBER>>]
ERROR: Invalid Macro name [DVD<<CHANGERNUMBER>>]
Got: [SendIR~HDMI~<<CHANGERNUMBER>>]
ERROR: Invalid Device/Command combination. [HDMI/<<CHANGERNUMBER>>]
Got: [SendIR~inday~<<CHANGERNUMBER>>]
ERROR: Invalid Device/Command combination. [inday/<<CHANGERNUMBER>>]
Got: [SendIR~DVD<<CHANGERNUMBER>>~play]
ERROR: Invalid Device/Command combination. [DVD<<CHANGERNUMBER>>/play]
Got: [GetState~butt]
State: [getstate,5:3]
Connect: [getstate,5:3
]
Rcvd: [state,5:3,1
] from IP: [192.168.1.72]
State Status on 192.168.1.72 on module #5 port #3. State = 1


The <<CHANGERNUMBER>> AND THE <<CHANGERLOCATION1+2+3>> ARE NOT WORKING.

If I use {{movies_nowplaying_changernumber_}} instead of <<CHANGERNUMBER>> it works but The slot numbers are missing. How do I select Movie #123 I have no slot number 1 and 2 and 3. I have changer# but no separate slot numbers.

Maik
Last edited by maik on Sun Jan 15, 2012 1:32 pm, edited 1 time in total.

User avatar
CinemarDave
Site Admin
Site Admin
Posts: 10535
Joined: Fri Feb 07, 2003 8:56 am
Location: Planet Earth
Contact:

Re: DVDLobby 3.90.x Questions

Postby CinemarDave » Sun Jan 15, 2012 1:29 pm

Is your DVDLobby Playmovie command calling a MLServer Macro? Does the macro then have the <<CHANGERNUMBER>> references in it? If this is true then that won't work because the <<CHANGERNUMBER>> references have to happen inside the PlayMovie command. What does the PlayMovie command look like? There are other options.

User avatar
maik
Senior Member
Senior Member
Posts: 208
Joined: Sat Mar 10, 2007 12:46 pm
Location: North Bay, Ontario, Canada
Contact:

Re: DVDLobby 3.90.x Questions

Postby maik » Sun Jan 15, 2012 1:37 pm

This is what it used to be in 3.75 and worked all the time.

Code: Select all

Macro|
MLDVDLobby|SETSOURCE~<<CHANGERNUMBER>>!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!
MLPause|2.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~stop!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~display!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~right!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION1>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION2>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~<<CHANGERLOCATION3>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~enter!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~Display!
MLPause|3.5!
MLGC100|DoMacro~DVD<<CHANGERNUMBER>>!
MLPause|1.5!
MLGC100|SendIR~HDMI~<<CHANGERNUMBER>>!
MLPause|1.5!
MLGC100|SendIR~inday~<<CHANGERNUMBER>>!
MLPause|1.5!
MLGC100|SendIR~DVD<<CHANGERNUMBER>>~play!


This worked for at least 2 years before.

Maik

User avatar
maik
Senior Member
Senior Member
Posts: 208
Joined: Sat Mar 10, 2007 12:46 pm
Location: North Bay, Ontario, Canada
Contact:

Re: DVDLobby 3.90.x Questions

Postby maik » Sun Jan 15, 2012 2:51 pm

I'm running server 2003 at home, my friend has XPpro with the same version of the MLServer, GC100 and MLDVDLobby and his is still working perfectly as mine was a while ago. Here is a question could a security update for Server 2003 have caused this problem?


The <<CHANGERNUMBER>> AND THE <<CHANGERLOCATION1+2+3>> ARE NOT WORKING.
If I use {{movies_nowplaying_changernumber_}} instead of <<CHANGERNUMBER>> it works but The slot numbers are missing.
How do I select Movie #123 I have no slot number 1 and 2 and 3. I have changer# but no separate slot numbers.


Maik


Return to “DVDLobby Questions & Answers”

Who is online

Users browsing this forum: No registered users and 1 guest